BGS Technic

Professional right-cut aviation snips 195 mm for precise cutting of sheet metal, stainless steel, copper and brass. Forged chrome-molybdenum blades with induction hardening for durability and clean cuts.

Professional HSS external deburring tool for rods, threaded bars, screws, pipes, and more. Suitable for steel, stainless steel, aluminum, brass, copper, fiberglass, plastic, and wood. Diameter range: Ø 3–19 mm.

Professional terminal tool set for safe and damage-free removal of vehicle connectors. Designed for VAG vehicles and compatible with Porsche, BMW, Mercedes, Volvo, and more. Ideal for ABS systems, sensors, and climate control units.

High-quality 3/8" slotted socket for safe and efficient installation and removal of temperature sensors, thermal switches, and pipe fittings, even in tight spaces. Its open slotted design allows work on components with through-wiring without damage.

This spring washer tool for VAG and Ford is specially designed for fast and safe removal and installation of lock washers and star washers. It is ideal for working on underbody shields, heat shields, and similar components.

Overview:
✔ For compressing piston rings during piston installation
✔ Adjustable diameter range from 80 to 110 mm
✔ Helps install pistons without damaging the piston rings
✔ Integrated spring mechanism for controlled compression
✔ Compressor band height of 75 mm
✔ Includes an angled tensioning key

Overview:
✔ For installing and removing piston rings
✔ Suitable for piston ring diameters from 110 to 160 mm
✔ Enables controlled, damage-free handling
✔ Helps prevent piston rings from springing away
✔ Suitable for engine repair and rebuilding work

Overview:
✔ Two-arm honing tool for cylinder bores
✔ Adjustable working diameter from 38 to 60 mm
✔ 30 mm honing stones with medium hardness
✔ Grit 220 for controlled surface finishing
✔ 6.3 mm (1/4") round-shank drive
✔ Adjustable pressure helps prevent scoring in the cylinder
✔ Suitable for use with low-viscosity or special honing oil

Overview:
✔ For removing and installing the flywheel-side crankshaft oil seal
✔ Suitable for selected Jaguar and Land Rover engines
✔ Includes fixing, forcing and removal screws
✔ Installation mandrel supports controlled positioning of the tool
✔ Suitable for engine codes including 448PN and 204DTD
✔ For use as Jaguar Land Rover 303-538

Overview:
✔ 3-piece tool set with 6 different tips
✔ Designed for installing and removing O-rings and seals
✔ Suitable for engine, transmission, steering and hydraulic applications
✔ Also suitable for interior trim and bodywork applications
✔ Nylon-fiber construction helps protect sensitive components and sealing surfaces

Overview:
✔ Tool set for removing and installing front and rear crankshaft radial oil seals
✔ Suitable for BMW N20, N26, N40, N42, N45, N45T, N46, N46T, N52, N53, N54 and N55 engines
✔ Includes dedicated removal and installation tools for both crankshaft ends
✔ Supplied with draw nuts, mounting screws and oil seal extraction screws
✔ Suitable for professional engine repair and oil seal replacement

Overview:
✔ Designed for quick removal of valve keepers
✔ Suitable for valve stem diameters up to 5.5 mm
✔ Compatible with passenger cars, scooters, mopeds and lawnmowers
✔ Simplifies valve-train disassembly
✔ Reduces the time and effort required for keeper removal

Overview:
✔ Compresses valve springs during valve assembly and removal
✔ Enables valve stem seal replacement without removing the cylinder head
✔ Compressed-air hose keeps the valve closed and prevents it from dropping into the combustion chamber
✔ Suitable for M14 and M18 spark-plug threads
✔ Includes a valve keeper installation tool
✔ Adjustable support frame with seven positioning holes
✔ Maximum working width: 515 mm

Overview:
✔ Removes stickers, decorative stripes, adhesive and film residue
✔ Suitable for metal surfaces without chemical removers
✔ Neutral-coloured rubber helps prevent smearing and colour transfer
✔ Cone shape enables targeted residue removal
✔ Suitable for drills and cordless drill drivers
✔ Maximum speed: 4,000 rpm
✔ Includes 5/16"-24 to 6 mm shank adapter

Overview:
✔ Designed for pulling rubber valves of all lengths into the rim hole
✔ Pivot joint prevents the valve from being pulled in at an angle
✔ Locking notches provide secure angle guidance
✔ Long lever arm enables controlled application of force
✔ Integrated VG5 valve core screwdriver insert in the handle end
✔ Plastic shaft helps prevent damage to alloy wheels
✔ Overall length: 285 mm

Overview:
✔ Four-piece tyre lever set
✔ Includes 300, 400, 500 and 600 mm levers
✔ Hardened construction for increased durability
✔ Chrome-plated surface finish
✔ Supplied in a Tetron roll-up storage bag

Overview:
✔ Supports easier and gentler tyre installation
✔ Suitable for most conventional tyres
✔ Not suitable for run-flat tyres
✔ Black colour for discreet application
✔ Supplied in a practical 5 kg bucket
✔ Suitable for professional tyre workshops

Overview:
✔ Holds the wheel securely in position on the wheel hub
✔ Enables easier installation without damaging the wheel
✔ Supports wheel installation together with wheel spacers
✔ Four thread sizes for universal vehicle coverage
✔ Knurled surface provides a secure grip during installation
✔ Compatible with most vehicle manufacturers and models
✔ Eight guide pins with a length of 133 mm