BGS Technic

Overview:
✔ Swivel socket for installing and removing glow plugs
✔ 14 mm 12-point working profile
✔ Flexible joint for improved access in confined areas
✔ 3/8" internal square drive
✔ Made from chrome vanadium steel
✔ Matt chrome-plated surface

Overview:
✔ For compressing piston rings during piston installation
✔ Adjustable diameter range from 80 to 110 mm
✔ Helps install pistons without damaging the piston rings
✔ Integrated spring mechanism for controlled compression
✔ Compressor band height of 75 mm
✔ Includes an angled tensioning key

Overview:
✔ For installing and removing piston rings
✔ Suitable for piston ring diameters from 110 to 160 mm
✔ Enables controlled, damage-free handling
✔ Helps prevent piston rings from springing away
✔ Suitable for engine repair and rebuilding work

Overview:
✔ Two-arm honing tool for cylinder bores
✔ Adjustable working diameter from 38 to 60 mm
✔ 30 mm honing stones with medium hardness
✔ Grit 220 for controlled surface finishing
✔ 6.3 mm (1/4") round-shank drive
✔ Adjustable pressure helps prevent scoring in the cylinder
✔ Suitable for use with low-viscosity or special honing oil

Overview:
✔ For removing and installing the flywheel-side crankshaft oil seal
✔ Suitable for selected Jaguar and Land Rover engines
✔ Includes fixing, forcing and removal screws
✔ Installation mandrel supports controlled positioning of the tool
✔ Suitable for engine codes including 448PN and 204DTD
✔ For use as Jaguar Land Rover 303-538

Overview:
✔ 3-piece tool set with 6 different tips
✔ Designed for installing and removing O-rings and seals
✔ Suitable for engine, transmission, steering and hydraulic applications
✔ Also suitable for interior trim and bodywork applications
✔ Nylon-fiber construction helps protect sensitive components and sealing surfaces

Overview:
✔ Tool set for removing and installing front and rear crankshaft radial oil seals
✔ Suitable for BMW N20, N26, N40, N42, N45, N45T, N46, N46T, N52, N53, N54 and N55 engines
✔ Includes dedicated removal and installation tools for both crankshaft ends
✔ Supplied with draw nuts, mounting screws and oil seal extraction screws
✔ Suitable for professional engine repair and oil seal replacement

Overview:
✔ Designed for quick removal of valve keepers
✔ Suitable for valve stem diameters up to 5.5 mm
✔ Compatible with passenger cars, scooters, mopeds and lawnmowers
✔ Simplifies valve-train disassembly
✔ Reduces the time and effort required for keeper removal

Overview:
✔ Compresses valve springs during valve assembly and removal
✔ Enables valve stem seal replacement without removing the cylinder head
✔ Compressed-air hose keeps the valve closed and prevents it from dropping into the combustion chamber
✔ Suitable for M14 and M18 spark-plug threads
✔ Includes a valve keeper installation tool
✔ Adjustable support frame with seven positioning holes
✔ Maximum working width: 515 mm

Overview:
✔ Removes stickers, decorative stripes, adhesive and film residue
✔ Suitable for metal surfaces without chemical removers
✔ Neutral-coloured rubber helps prevent smearing and colour transfer
✔ Cone shape enables targeted residue removal
✔ Suitable for drills and cordless drill drivers
✔ Maximum speed: 4,000 rpm
✔ Includes 5/16"-24 to 6 mm shank adapter

Overview:
✔ Designed for pulling rubber valves of all lengths into the rim hole
✔ Pivot joint prevents the valve from being pulled in at an angle
✔ Locking notches provide secure angle guidance
✔ Long lever arm enables controlled application of force
✔ Integrated VG5 valve core screwdriver insert in the handle end
✔ Plastic shaft helps prevent damage to alloy wheels
✔ Overall length: 285 mm

Overview:
✔ Four-piece tyre lever set
✔ Includes 300, 400, 500 and 600 mm levers
✔ Hardened construction for increased durability
✔ Chrome-plated surface finish
✔ Supplied in a Tetron roll-up storage bag

Overview:
✔ Supports easier and gentler tyre installation
✔ Suitable for most conventional tyres
✔ Not suitable for run-flat tyres
✔ Black colour for discreet application
✔ Supplied in a practical 5 kg bucket
✔ Suitable for professional tyre workshops

Overview:
✔ Holds the wheel securely in position on the wheel hub
✔ Enables easier installation without damaging the wheel
✔ Supports wheel installation together with wheel spacers
✔ Four thread sizes for universal vehicle coverage
✔ Knurled surface provides a secure grip during installation
✔ Compatible with most vehicle manufacturers and models
✔ Eight guide pins with a length of 133 mm

Overview:
✔ Measures vehicle tyre pressure from 0.35 to 7.00 bar
✔ Selectable PSI, bar, kPa and kg/cm² units
✔ Compact and lightweight design
✔ Automatic shut-off after approximately 60 seconds
✔ Supplied with a CR2032 lithium battery
✔ Simple operation with a clear digital display

Overview:
✔ Torque range: 200–800 Nm
✔ 3/4" external square drive
✔ Designed for industrial and commercial-vehicle applications
✔ Robust, long two-piece construction
✔ Reversible fine-tooth ratchet with 24 teeth
✔ Trigger accuracy: ±3%
✔ Laser-etched scale with 4 Nm fine graduation
✔ Supplied in a secure plastic storage case

Overview:
✔ Facilitates the transport of heavy truck wheels
✔ Frame width (wheel support): 500 mm
✔ Frame depth (wheel support): 350 mm
✔ Maximum wheel weight: 68 kg
✔ Suitable for workshop use

Overview:
✔ Pneumatic tyre inflator with a measuring range of 0–15 bar
✔ Angled tyre valve connector separated from the control unit
✔ Flexible 340 mm hose between the connector and housing
✔ Four pressure scales: bar, kPa, kg/cm² and PSI
✔ Rubber-protected pressure gauge with a visible diameter of 49 mm