Differential Bearing Socket Tool for Subaru Transmissions – as 18630AA010, 499787000
-
Code:118707
-
Weight:0.440 Kgs
Overview:
✔ Professional special socket for Subaru transmissions and differentials
✔ Designed for loosening and tightening Sundial Bearing locknuts
✔ Suitable for manual, automatic and rear differential gearboxes
✔ Essential for driveshaft seal and transmission repairs
✔ Compatible with many Subaru models from 1993 onwards
✔ Suitable for 5-speed and 6-speed manual transmissions
✔ Used as 18630AA010 and 499787000
✔ Suitable for professional workshop use
Professional special socket designed for loosening and tightening the differential and driveshaft retaining nuts on many Subaru manual and automatic transmissions, as well as rear differential transfer cases.
The so-called “Sundial Bearing” retaining nut is extremely difficult to remove or tighten correctly without the proper special tool. This socket allows safe and damage-free servicing according to manufacturer specifications.
An essential tool for replacing axle shaft seals, driveshafts, and performing gearbox or differential rebuilds.
This multi-spline differential bearing locknut is commonly fitted to most Subaru automatic transmissions from 1993 onwards, 5-speed and 6-speed manual transmissions from 1993 onwards, and many rear axle differentials.
Applications
Suitable for:
- Subaru automatic transmissions from 1993 onwards
- Subaru 5-speed manual transmissions from 1993 onwards
- Subaru 6-speed manual transmissions from 1993 onwards
- Various Subaru rear differential units
Technical Information
- Tool type: Differential bearing socket tool
- Application: Differential and driveshaft retaining nuts
- Design: Multi-spline special socket
- Suitable for transmission and differential service
- Used as 18630AA010
- Used as 499787000
Original reference numbers are used for comparison purposes only. This is not an original Subaru tool.
