Thread Adapter Male 1.1/2" to Female 2 1/4" for Hydraulic Cylinders and Wheel Hub Flange
-
Code:113872
-
Weight:1.000 Kgs
Overview:
✔ Special thread adapter for hydraulic cylinder applications
✔ Converts 1.1/2" x 16 UNS male thread to 2 1/4" x 14 UNS female thread
✔ Enables forward mounting direction of hydraulic cylinders
✔ Suitable for pressing out drive shafts and wheel hubs
✔ Manufactured from SCM440 steel
✔ Suitable for hydraulic cylinder and wheel hub flange applications
The thread adapter is specially designed for hydraulic cylinders with a 1.1/2" x 16 UNS male thread and allows installation into wheel hub adapter flanges with a 2 1/4" x 14 UNS female thread.
This configuration allows the hydraulic cylinder to be installed in a forward pressure direction, enabling applications such as pressing out drive shafts or separating wheel hubs from axle stubs.
The adapter provides a practical solution for extending the range of compatible hydraulic applications and workshop operations.
Important Information
When using the adapter, the maximum internal height must be considered. Depending on the installation depth and hydraulic cylinder stroke, the pressure ram may reach its travel limit.
The flat contact surface minimizes the risk of component damage during use.
Technical Specifications
- External thread: 1.1/2" x 16 UNS
- Internal thread: 2 1/4" x 14 UNS
- Material: SCM440 steel
