Tire Valve Seat Cleaning Tool Set, 7 pcs, for Steel and Alloy Wheels

Comprehensive tool set for cleaning the sealing surfaces of tire valves directly on and inside the wheel.

Especially on older alloy wheels, oxidation can damage the sealing surface used by rubber snap-in valves and screw-in metal valves. This can cause gradual pressure loss even after a new tire valve has been installed.

The specially shaped two-stage abrasive tools remove deposits, oxidation and paint residue from the valve seat, creating a clean sealing surface and helping prevent leaks between the valve and wheel.

For Alloy and Steel Wheels

Suitable for rubber and screw-in metal valves on passenger car and van alloy wheels as well as steel wheels.

Heavy oxidation and deposits are first removed with the supplied milling scraper attachment.

The three abrasive tools with different diameters of 14 mm, 17 mm and 20 mm are then used to produce a fine and clean sealing surface.

Access to Deep Valve Holes

The different adapter extensions allow the valve seat to be reached even in deep-set valve holes or confined installation areas.

The drill adapter with quick coupling allows the abrasive tools to be driven with a cordless drill while maintaining safe access to the sealing surface.

Recommended Applications

Particularly useful:

• After tire replacement
• During wheel refurbishment
• After wheel painting or coating
• In cases of recurring valve seat leaks
• When gradual tire pressure loss is suspected

Scope of Delivery

• Item no. 125023 – 1 x abrasive tool, 11.3 mm / 14 mm
• Item no. 125024 – 1 x abrasive tool, 11.6 mm / 17 mm
• Item no. 125025 – 1 x abrasive tool, 11.6 mm / 20 mm
• Item no. 125022 – 1 x steel milling scraper attachment, 11.5 mm / 17 mm
• Item no. 125021 – 1 x drill adapter with quick coupling, length 140 mm
• Item no. 125026 – 1 x extension for abrasive tools, length 66 mm
• Item no. 125027 – 1 x extension for abrasive tools, length 95 mm
• 1 x sturdy storage case