VAG

Overview:
✔ Installation tool for front crankshaft oil seals and seal flanges
✔ Suitable for FPM, ACM and PTFE oil seals
✔ Covers selected VAG petrol engines from 1.4L to 2.8L
✔ Covers selected VAG diesel engines from 1.2L to 2.0L
✔ Ensures controlled and even pressing into the correct position
✔ For use as VAG T10053

Overview:
✔ Tool set for replacing pulley-side crankshaft oil seals
✔ Suitable for selected VAG Group 6- and 8-cylinder engines
✔ Covers Audi, VW, Porsche, Bentley and Lamborghini applications
✔ Includes sizing, guide and press components for different engine variants
✔ Designed for controlled installation of PTFE radial oil seals
✔ Supplied in a robust storage case, for use as T40048

Overview:
✔ Installation tool for front crankshaft oil seals
✔ Suitable for VAG 1.8L and 2.0L TSI/TFSI EA888 engines
✔ Covers EA888 generations 1, 2, 3 and 4
✔ Spindle-driven installation for controlled and even pressing
✔ Suitable for VW, Audi, SEAT, Škoda, CUPRA and Porsche
✔ Professional-quality Stahlmaxx tool for use as T10354

Overview:
✔ Tool set for installing front PTFE crankshaft oil seals
✔ Suitable for Ford EcoBoost and VAG MPI, TSI and TFSI engines
✔ Compatible with 1.0L, 1.2L, 1.3L, 1.4L and 1.5L engines
✔ Ensures centred and controlled installation using the original mounting bolt
✔ Includes installation sleeve, guide sleeve and fitting sleeve
✔ To be used as VAG T10485 and Ford 303-1721

Overview:
✔ Six-piece set for installing front camshaft and intermediate-shaft oil seals
✔ Suitable for many VW, Audi, SEAT and Škoda 1.6L and 1.8L engines
✔ Covers naturally aspirated 1.6L and 1.8L engines and 1.8L Turbo engines
✔ Includes dedicated guide sleeves, press sleeves and installation screws
✔ Ensures correct alignment and installation depth
✔ Professional-quality Stahlmaxx tool set for use as T10071

Overview:
✔ Installation aid for sizing rear PTFE crankshaft oil seals
✔ Suitable for selected VAG 4-, 6- and 8-cylinder engines
✔ Expands the oil seal to the required crankshaft diameter
✔ Enables damage-free transfer onto the appropriate guide sleeve
✔ Helps prevent the sealing lip from folding and causing oil leakage
✔ For use as VAG T10122/1

Overview:
✔ Guide sleeve for centring and positioning the rear crankshaft oil seal
✔ Suitable for selected VAG 3.0L TFSI, 3.2L FSI and 4.2L FSI engines
✔ Designed for controlled installation of PTFE oil seals
✔ Ensures accurate alignment before the seal is pressed into position
✔ Helps prevent the sealing lip from folding and causing oil leakage
✔ For use as VAG T10122/2

Overview:
✔ Press sleeve for installing the flywheel-side crankshaft oil seal
✔ Suitable for selected VAG 3.0L TFSI, 3.2L FSI and 4.2L FSI engines
✔ Designed for controlled installation of PTFE oil seals
✔ Helps prevent deformation and folding of the sealing lip
✔ Can be installed by hand or with careful, light tapping
✔ For use as VAG T10122/3, Ford 303-505 and 21-208

Overview:
✔ Press sleeve for installing rear crankshaft oil seals
✔ Suitable for selected VAG 6- and 8-cylinder engines
✔ Also suitable for specific Opel, Peugeot and Volvo engines
✔ Ensures even pressing around the entire oil seal circumference
✔ Helps prevent PTFE sealing-lip deformation and installation damage
✔ For use as T10122/5 and EN-51145

Overview:
✔ Guide tool for installing rear crankshaft oil seals
✔ Suitable for selected VAG 4-, 6- and 8-cylinder FSI and TFSI engines
✔ Designed for controlled installation of PTFE oil seals
✔ Helps prevent the sealing lip from folding or becoming damaged
✔ Used with the appropriate sizing tool and pressure sleeve
✔ For use as T10122/6A

Overview:
✔ Four-piece set for installing front crankshaft oil seals
✔ Suitable for selected VAG and Porsche V6 and V8 engines
✔ Covers EA897 Gen 2 TDI, EA898 Gen 1 TDI and EA825 TFSI engines
✔ Includes two guide sleeves, one pull-in sleeve and one press tool
✔ Protects PTFE sealing lips against folding and installation damage
✔ For use as T40320B

Overview:
✔ Installer for the front crankshaft oil seal
✔ Designed for VAG 4.0L V8 TDI Common Rail engines
✔ Suitable for EA898 Generation 1 engines
✔ Ensures controlled pressing to the correct installation position
✔ Requires a separate guide sleeve for damage-free installation
✔ For use as T40320/3