Bucket Tappet Holding Tool for Fiat, Peugeot, Hyundai, Renault and Iveco, as 1860724001
-
Code:106641A
-
Weight:0.100 Kgs
Overview:
✔ Holds the bucket tappet in the depressed position
✔ Enables removal of valve adjustment shims
✔ Suitable for compatible Fiat, Peugeot, Hyundai, Renault and Iveco engines
✔ Applicable to Fiat Ducato 2.8 L 230 and 244 models
✔ Suitable for engine code 8140.43
✔ Used as Fiat 1860724001 and as Fiat 1860724000
The holding tool is used to retain the bucket tappet in its lowered position during valve clearance adjustment.
The tappet must first be pressed down with a separate tool. The holder is then positioned to keep the tappet depressed, allowing the adjustment shim to be removed.
Recommended Tool Combination
For depressing the bucket tappet on applications such as the Fiat Ducato 2.8 L 230 and 244, use of Item no. 22040 or Item no. 116578 is recommended.
For removing the valve adjustment shim, use of Item no. 14041 is recommended.
These additional tools are not included.
Operating Principle
- Press the bucket tappet downward with a suitable separate tool.
- Position the holder to retain the tappet in the depressed position.
- Remove the adjustment shim with a suitable extraction tool.
- Replace the shim as required and remove the holder according to the applicable repair procedure.
Compatibility
- Manufacturers: Fiat, Peugeot, Hyundai, Renault, Iveco
- Example application: Fiat Ducato 2.8 L, 230 and 244
- Engine code: 8140.43
Compatibility must be verified according to the engine and bucket tappet design.
Comparison References
- Used as Fiat 1860724001
- Used as Fiat 1860724000
- Used as Hyundai 09220-2D000 tappet stop
Original numbers are for comparison purposes only; this is not an original tool!