STAHLMAXX

Professional diagnostic tool for accurate testing of Common Rail high-pressure pumps and injectors. Enables direct physical pressure measurement up to 2000 bar for diagnosing start pressure, operating pressure, maximum pressure, and system leaks in modern diesel engines.

Professional special tool kit for replacing injector sealing rings. Includes mounting sleeve and cone for safe, precise installation. Compatible with selected Mercedes, Ford, and Volvo petrol engines.

Adapter for safe removal of plastic injectors from 3.0L TFSI direct-injection engines. M8x1.25 internal thread. Equivalent to T10133/22.

Professional injector extraction claw for safe removal of stuck Delphi Piezo common-rail injectors on Mercedes OM651, OM646*, Kia, and Hyundai engines without removing the cylinder head.

Professional airbag special socket for Porsche vehicles, designed for removal and installation of airbag control units and gyro sensors with serrated safety screws.

Overview:
✔ Professional timing tool set for Mercedes OM654 and OM656 engines
✔ Designed for checking and adjusting timing chain timing
✔ Enables timing inspection with minimal disassembly
✔ Suitable for timing chain replacement via pull-through and riveting
✔ Includes camshaft and crankshaft locking and adjustment tools
✔ Covers a wide range of Mercedes models and engine codes
✔ Supplied in durable storage case

Overview:
✔ Camshaft sprocket holding tool for Porsche engines
✔ Designed for 911, 964 and 993 models
✔ Prevents rotation during tightening and loosening
✔ Compatible with M64 and 930 engine series
✔ Ensures safe and controlled camshaft service

Overview:
✔ Professional camshaft holding tool for Mercedes OM654 and OM656 engines
✔ Designed for base timing adjustment and camshaft service
✔ Ensures secure fixation during loosening and tightening operations
✔ Required for safe handling of camshaft sprockets
✔ Essential tool for modern Mercedes engine repair

Overview:
✔ Professional timing positioning tool for Mercedes-Benz M254, M256, OM654, OM656
✔ Designed for precise crankshaft and camshaft positioning at TDC (cylinder 1)
✔ Replaces vibration damper during timing procedures
✔ Includes adapters for exhaust camshaft position control
✔ Suitable for modern Mercedes petrol and diesel engines

Overview:
✔ Special tool for pre-tensioning timing chain on B48TU engines
✔ Designed for BMW B42, B46 and B48TU engine variants
✔ Used as 2455654
✔ Ensures precise timing adjustment during engine repair
✔ Required for timing chain replacement and engine rebuilds
✔ Equipped with spring-loaded piston for accurate tensioning
✔ Suitable for professional workshop use

Overview:
✔ Crankshaft counter holder and balance shaft locking tool set
✔ For BMW, Citroen and Peugeot engines
✔ Suitable for EP6, N-series engines
✔ Supports balance shaft and crankshaft service
✔ Includes holders, pins and adapters
✔ Used as 113340 / 114362 / 115140 / 119280 / 119330

Overview:
✔ Flywheel holding tool for BMW engines
✔ Suitable for automatic transmission applications
✔ Designed for gearbox housings with square opening
✔ Covers wide range of BMW engines (M, N series, W17)
✔ Extension tool for item.no. 999170
✔ Enables secure flywheel fixation during service
✔ Used as 118660

Overview:
✔ Professional Valvetronic valve spring compressor (58 mm)
✔ Designed for BMW N13, N20, N26, N52, N55, S55 engines
✔ Enables safe removal and installation of intermediate lever springs
✔ Suitable for guide blocks with 58 mm width
✔ Ensures controlled handling of high-tension springs
✔ Essential for precise and damage-free service

Overview:
✔ Camshaft locking bridge tool for BMW Mini and Chrysler engines W10, W11, EDJ
✔ Ensures secure camshaft fixation during engine service
✔ Suitable for timing and maintenance procedures
✔ Designed for precise engine timing alignment
✔ Compatible with Mini and Chrysler models
✔ Used as BMW 118250 and Chrysler 8435

Overview:
✔ Professional timing tool kit for BMW N63, S63, N74 engines
✔ Suitable for 4.4L V8 and 6.0–6.8L V12 petrol engines
✔ Includes timing chain preload tool for accurate adjustment
✔ Covers camshaft, crankshaft, and timing chain locking
✔ Designed for workshop-level engine service and repair

Overview:
✔ Special locking tool for gear backlash adjustment system
✔ Designed for VAG EA825 and EA839 engine platforms
✔ Suitable for 2.9L, 3.0L, and 4.0L TFSI engines
✔ Ensures correct alignment of gear backlash compensation mechanism
✔ Used like T40362
✔ Essential for precise engine timing and internal alignment

Overview:
✔ Professional-grade tensioner wrench for VAG V8 engines
✔ Designed for 3.7L and 4.2L Audi / Volkswagen engines
✔ Enables precise adjustment of timing belt tensioner
✔ Ensures correct timing belt tension and engine reliability
✔ Suitable for workshop use during timing belt service

Overview:
✔ Crankshaft turning key for precise TDC positioning
✔ Designed for Audi 2.5L 5-cylinder TFSI engines
✔ Dual drive: 1/2" square drive and 22 mm hex
✔ Enables controlled manual rotation of crankshaft
✔ Ideal for timing and engine adjustment procedures
✔ Suitable for professional workshop use