Valve Cutting & Grinding Tools

Overview:
✔ 27-piece set for machining standard valve seats
✔ Cutter diameters from 30–60 mm
✔ Each cutter provides 45° and 90° cutting angles
✔ 13 valve guide pilots from 6–12 mm
✔ Cutters manufactured from heat-treated C45 steel
✔ Guide pilots manufactured from HSS 4341 high-speed steel
✔ Supplied in a metal storage case
✔ Not suitable for hardened valve seats

Overview:
✔ Suitable for hardened and standard valve seats in cylinder heads
✔ Covers valve-seat diameters from 28–65 mm
✔ Cutting angles: 30°, 45°, 60°, 68° and 75°
✔ Six double-sided valve seat cutters
✔ Four continuously adjustable guide pilots covering 6.5–12.5 mm
✔ Includes one fixed 5.5 mm guide pilot and a T-handle
✔ Suitable for hardened valve seats used in unleaded-fuel engines

Overview:
✔ Designed for lapping intake and exhaust valves on petrol and diesel engines
✔ Automatic direction reversal: 800 cycles per minute
✔ Intended for use with fine valve grinding paste
✔ Includes five rubber adapters: 16, 20, 30, 35 and 45 mm
✔ Maximum working pressure: 6.3 bar
✔ Air consumption: 50.2 l/min
✔ Tool length: 289 mm

Overview:
✔ Complete set for fast and controlled valve lapping
✔ Suitable for standard electric and cordless drills
✔ Converts continuous drill rotation into an alternating left-right movement
✔ Includes 22 mm and 28 mm rubber suction cups
✔ Teroson 2-in-1 paste with coarse and fine grinding compounds
✔ Water-soluble paste with good surface adhesion
✔ Paste content: 100 ml

Overview:
✔ Two-stage paste for grinding and lapping valves and valve cones
✔ Dual container with coarse pre-grinding and fine finishing compounds
✔ Good adhesion to the working surfaces
✔ Easy-to-apply, thick liquid consistency
✔ Water-soluble synthetic-oil base for easy rinsing
✔ Contains fused aluminium oxide abrasive
✔ Total content: 100 ml

Overview:
✔ Drill attachment for faster and more consistent valve lapping
✔ Automatic reversal of the rotation direction
✔ Designed for use with fine valve grinding paste
✔ 8 mm drive shaft for mounting in a drill chuck
✔ Recommended drill speed: 1,000–1,250 rpm
✔ Includes rubber adapters in 20, 30, 35 and 45 mm
✔ 13 mm adapter shaft for attaching the rubber adapters

Overview:
✔ Rubber adapter for compatible valve lapping tools
✔ Diameter: 20 mm
✔ Provides secure contact with the valve head during lapping
✔ Suitable as a replacement or supplementary adapter

Overview:
✔ Rubber adapter for compatible valve lapping tools
✔ Diameter: 30 mm
✔ Provides secure contact with the valve head during lapping
✔ Suitable as a replacement or supplementary adapter

Overview:
✔ Rubber adapter for compatible valve lapping tools
✔ Diameter: 35 mm
✔ Provides secure contact with the valve head during lapping
✔ Suitable as a replacement or supplementary adapter

Overview:
✔ Rubber adapter for compatible valve lapping tools
✔ Diameter: 45 mm
✔ Provides secure contact with the valve head during lapping
✔ Suitable as a replacement or supplementary adapter

Overview:
✔ Manual tool for lapping engine valves
✔ Two rubber suction cups: 16 mm and 21 mm
✔ Wooden handle for controlled rotation
✔ Overall length: 210 mm
✔ Suitable for smaller valves with smooth, clean surfaces

Overview:
✔ Manual tool for lapping engine valves
✔ Two rubber suction cups: 28 mm and 34 mm
✔ Wooden handle for controlled rotation
✔ Overall length: 220 mm
✔ Suitable for valves with smooth, clean surfaces